You need to pick a product you can rely on when it comes to safety. If your project is successful, one safety element you won’t have to worry about is toeboards. You could encounter a variety of issues if your toeboards aren’t functioning properly. Workers run the risk of being found to be in violation of safety regulations in addition to suffering injuries.
The construction and design of our OSHA Toeboard are exclusive. Utilizing our toeboards will make it simple for you to meet your strict safety requirements because they are incredibly versatile and easy to utilize.
What Is a Toeboard?
To safeguard workers in potentially hazardous places, toeboards are protective obstacles that are positioned close to the ground or walking surface. Certain work areas provide a risk of objects falling from higher areas, and it is impossible to totally rule out this possibility.
Toeboards can be utilized as part of the guardrail system or as a warning to employees when they are approaching an edge where they could trip and fall. In situations where there is a risk of objects falling, such as floor openings or holes, ramps, runways, scaffolding, and elevated walkways, it is advised to have toeboards.
OSHA Regulations
It is the responsibility of every employee to ensure that their workplace is safe. The workspace needs to be secure and healthy, and you are accountable if any of your workers get sick or hurt there as a result of the conditions you supply. You might not have to abide by every OSHA regulation if you employ fewer than ten people, but you could still be held liable for any illnesses or injuries they get at work.
Toeboards are subject to strict regulations from OSHA, and you will be required to supply them when it’s essential to shield your workers from recognized risks. You must safeguard your staff in that region if you are aware that there are objects there that could fall. This regulation is applicable whenever there could be a chance of falling objects, such as stairwells, high platforms, wall openings, and platform holes.
Toeboards must adhere to OSHA rules, which have certain requirements. For example, the minimum height of a toeboard from its top to the level of the working and walking surface must be at least 3-1/2″. You also need a sturdy, long-lasting substance because toeboards need to withstand at least fifty pounds of strain.
We can assist you comprehend how the regulations relate to your work environment if you have any questions about how to get your workplace up to code.
Installation Guidelines for Toeboards
There are a few considerations to make sure you are adhering to any local laws and guidelines pertaining to workplace safety. To stop objects from falling on employees, for example, you must ensure that the toeboards are at the optimal height. If your toeboards aren’t providing enough protection, you might have to raise their height.
To ensure you receive the maximum advantage from installing toeboards, carefully follow the directions. Make cautious to remove any nails or debris that could injure someone upon touch if you must remove your toeboards.
Taking Off Toeboards
The system could need to be removed entirely if a portion of the area becomes dangerous. The integrity of a safety system may be jeopardized if one component isn’t operating as it should. The procedures to follow for taking off toeboards are as follows:
- Make sure there are no slipping hazards or other safety dangers by cleaning and organizing the space.
- Make sure the area is clearly marked so that people are aware that it should be avoided until the work is finished.
- Inform everyone in the vicinity that the safety features are being jeopardized.
- While this work is being done, set up any temporary mechanisms you need to ensure safety.
Which Workplaces Demand Toeboards?
If you believe that employing toeboards can make your workplace safer, you might want to think about using them even if your working site does not require them. Safety truly has no cost, and you won’t regret taking the necessary precautions to keep your staff safe.
One situation where toeboards might not be necessary is on mobile or temporary job sites, particularly if they are little. Here is an incomplete list of industries that may require toeboards:
- Construction sites
- Roofing work
- Scaffolding
- Bridges and highways construction
- Shipbuilding and repair
- Industrial maintenance
- Window installation
- Telecommunication tower work
- Power line maintenance
- Wind turbine maintenance
- And more!
Quick-Setting Polymer
Our company’s robust polyurethane is the secret to our excellent products. Products typically made of ceramic, metal, or wood can be replaced with our fast set polymer.
Our method of producing polyurethane is known as reaction injection molding. The two polymer components are combined throughout the process, usually at a high speed in a chamber. After that, the mixture is allowed to expand and cure inside the mold.
Using this type of product allows us to produce lightweight, flexible, and sturdy items. It is possible to paint the material to make it fit wherever it is utilized. This approach also has the advantage of being quicker than other methods and producing a product with a lower viscosity than many other polymer types.
Are You Better Off With Toeboard Links?
You need to locate something that will fulfill your needs without creating issues when searching for the ideal product to suit your business’s and your projects’ needs. Our proprietary polymer is used to create distinctive, flexible toeboard links with special design aspects that might add added value.
Our toeboard links can provide you with a high-quality, long-lasting, and user-friendly solution that is safe, as you deserve the best product available. Since 1978, Intrepid Industries has been producing high-quality products, which are currently in use in a wide range of settings, including chemical plants, paper mills, automotive, offshore, and maritime environments. Visit our website or contact a representative right now to learn more about how our goods can help you.
